KONI INSTALL OVERVIEW

OK soldier, your mission is to pull out your old shocks from the front strut and put
in those KONIs. Take a look at the pic below.

As you can see, the original shock is inside the front strut. It's not meant
to be removed, so you got to cut it out. Essentially you need to cut off
enough of the top of the strut so you can pull out your old shock and put in
that brand new Koni. Since you just cut off the top, the only way that new
Koni is going to stay in the strut is by drilling a hole at the bottom of the strut
and inserting a 14mm screw to hold the shock in place.

Back to Koni Tips